Australian Export Enamel - Non-Toxic Alternative Australian Export Enamel is a superior-quality spray enamel suitable for both indoor and outdoor use. It can be applied on various surfaces such as cupboards, doors, gates, wrought iron, screens, trellises, metal surfaces, letterboxes, or toys that require enamel paint. This product is quick-drying and reduces toxicity levels. Instructions for Use: Before using the spray, shake the can thoroughly for about a minute until the ball rattles inside. Hold the can approximately 30cm away from the surface and apply a light mist coat by spraying in a continuous motion across the surface while working downwards. Wait for 30 seconds to allow the solvent to flash off. Apply an additional two coats in the same manner for best results. If you require a thicker film thickness, apply more light coats and ensure adequate drying time between coats. The recoating time is after one hour. After usage, invert the can and spray until the clean gas is expelled.