E-06270 contains:

44 HSS-R Drill Bits: 5 x 1mm, 5 x 1.5mm, 5 x 2mm, 4 x 2.5mm, 5 x 3mm, 2 x 3.2mm, 4 x 3.5mm, 4 x 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 9mm and 10mm

13 Masonry Drill Bits: 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm and 10mm x 120mm, 8mm and 10mm x 300mm

8 Wood Drill Bits, Half Ground: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm and 10mm

6 x ½” Hex Shank Flat Bits: 12mm, 16mm, 18mm, 20mm, 22mm and 25mm

60 Screwbits C-Form: 2 x PH0, 2 x PH1, 6 x PH2, 2 x PH3, 1 x PH4, 2 x PZ0, 2 x PZ1, 4 x PZ2, 2 x PZ3, 2 x SL0.5x3, 2 x SL0.8x4, 2 x SL0.85x5, 2 x SL1x5.5, 2 x SL1x6, 2 x SL1.2x7, 2 x SL1.6x8, HEX3, HEX4, HEX5, HEX6, HEX7, HEX8, 2 x T10, 2 x T15, 2 x T20, 2 x T25, T27, 2 x T30, T35, T40, T45, SQ1, SQ2 and SQ3

40 Screwbits E-Form: 2 x PH0, 2 x PH1, 3 x PH2, 2 x PH3, PZ0, 2 x PZ1, 2 x PZ2, 2 x PZ3, T10, T15, T20, T25, T27, T30, T40, T45, 2 x SL0.5x3, 2 x SL0.8x4, 2 x SL0.8x5, 2 x SL1x6, SL1.2x7, SL1.6x8, HEX3, HEX4, HEX5, HEX6, HEX7 and HEX8

20 Nut Setters: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 5/32, 3/16, 7/32, ¼, 9/32, 5/16, 11/32, 3/8, 7/16 and ½

Counter Sink: 12.7

Magnetic Bit Holder

4 Depth Stops: 3mm, 5mm, 8mm and 10mm

4 Hole Saws: 32mm, 38mm, 44mm and 54mm

Hex Wrench for Depth Stop, Diameter Gauge, Arbour for Hole Saw, 3 Metre Tape Measure, Spirit Level, T-Shaped Screwdriver Handle Magnetic Tip, 2 Centre Punch: 1.5mm and 2.5mm, Pencil, Flexible Bit Holder and Screwdriver for C-Form