KYO-EI (Kyohisashi Sangyo) Bimecc (Bimekku) Wheel Spacer Porsche Thickness 7Mm5H130 Inner Diameter 71.6Mm SP7POR
KYO-EI (Kyohisashi Sangyo) Bimecc (Bimekku) Wheel Spacer Porsche Thickness 7Mm5H130 Inner Diameter 71.6Mm SP7POR
-
This item is currently not available
Shop with confidence
- Accessories: *Please check the manufacturer's website for compatibility and specifications. http://www.kyoei-ind.co.jp/sangyo/
- Quantity: 2 pieces
Quantity: 1 set (2 pieces)
After installing the spacer, we recommend adjusting the alignment to prevent wear on the tires.
This spacer is for import vehicles. Please do not install vehicles other than the specified vehicle.
Long bolts are required to install the spacer. Long bolts sold separately. Please order together when you purchase.
Please extend the bolt according to the thickness of the spacer. If the spacer thickness is 0.2 inch (5 mm), please extend the bolt length below the neck length of 0.2 inch (5
Please use the same type of bolt as the shape of the bolt attached to the current wheel used. Also, please extend the length of the neck according to the spacer thickness and attach it.
In order to secure the wheels, please make sure to tighten the screws of the bolt at least 0.4 inches (10 mm).
Please be careful of the seat of the bolt. The seat on the wheel has a 60° tapered and spherical position. Select the bolts that fit the wheel to install.
It cannot be used if the bolt comes into contact with the brake system (ABS sensors, etc.) located inside the hub. After installation, be sure to turn the wheel by hand to make sure the bolt is not interfered.
Depending on the car model, there are vehicles with extremely low hubs. In those cases, they cannot be used for hub centric.
We cannot guarantee any damage or damage if installed on a vehicle that has been modified or installed.
Due to individual differences and deformation of the vehicle, there is a possibility that there is no gap between the vehicle and the spacer and the product may not adhere to the product. Please make sure there is no gap when you wear it.
Please temporarily assemble the spacer on the vehicle's side hub and wheel side hub holes to make sure the spacer is attached. Please do not use this product if it does not fit smoothly, there are rattles after installation, or there is a gap on the mounting surface.
Installation may be difficult due to dirt on the car hub and wheels. Please use a brush to clean the dirt thoroughly before installing it.
[Regarding compatibility]
We do not check the compatibility of this product.
Please check the compatibility information on the manufacturer's website before purchasing.
Please note that we cannot accept returns or exchanges due to inconformities after purchase.
For more product information, please check the manufacturer's website.
- Item Model Number: SP7POR
- Brand: Kyo-ei
- Manufacturer Part Number: SP7POR
- Item Weight: 678 g
- Model: SP7POR
- Package Dimensions: 19.6 x 18.5 x 2.7 cm; 678 Grams
- Manufacturer: 協永産業(Kyoei Sangyo)
-
This item is currently not available