How to use Tulip 3D Paint

1. Prewash fabric before painting to remove sizing. Do not use fabric softener
2. Shake bottle well.
3. Insert shirt board or cardboard between layers of fabric.
4. Squeeze Dimensional Paint right out of the bottle.
5. Hold tip to surface and squeeze gently. Let dry flat 4 hours.
6. Wait 72 hours before washing. Wash in warm water, gentle cycle with mild soap; line dry. Clean up with soap and water. Do not dry clean.

Tips & Tricks

Choose fabrics that are machine or hand washable. For best results, use 50/50 cotton/polyester blends.

• Test paint in a hidden area to ensure compatibility with fabric.
• Hold the dimensional paint bottle in your hand like a pencil.
• Tap bottle firmly, tip downward, on hard surface. Flush out bottle by squeezing out a small amount of paint, and wiping tip clean.
• For raised linework, hold the bottle at an angle to the fabric, allowing more paint to escape. For flat linework, hold bottle straight up and down, allowing less paint to escape. Practice your linework on preprinted paper towels.
• Replace and store bottle in convenient CapStand to keep air bubbles flowing to back of bottle.

Set rhinestones, buttons and charms by squeezing a bead of paint about the same size as the stone. Place stone on top of paint. Gently tap rhinestone into paint so that the paint come up around edges to form a setting. Let dry flat.